Printek FormsMaster 8000se Series Horizintal Position, Superscript Printing, Carriage Return

		Genicom 3840 and 3410 ANSI Emulation
Escape Sequence:	ESC	K
Hexadecimal:	1B	4B
Superscript Printing		PLU

Moves paper ½ line above the current line for superscript printing.

If 8-bit control code processing is enabled then.

Control Code: PLU

Hexadecimal: 8C

Superscript Printing ESC L

Moves paper ½ line above the current line for superscript printing. ESC L is also used to return to the original line following ESC K (subrscript).

If 8-bit control code processing is enabled then.

Escape Sequence:	ESC	L
Hexadecimal:	1B	4C

NOTE: The partial line up does not respect top of form; that is, following a form feed, ESC L causes a partial line movement upward. Also, partial line down does not respect bottom of form; that is, when printing the last line on the form, ESC L causes a partial line movement downward.

CAUTION: When printing the last line on a form, do not send a line feed (LF) code to move directly from superscript to subscript. The LF code will be acted upon as the bottom of form terminator.

Horizintal Position

Carriage Return CR

Initiates printing and returns the current print position to the left margin.

Control Code:	CR
Hexadecimal:	0D
Backspace	BS

Prints the data in the print buffer, then moves the print position one character position to the left.

Control Code:		BS
Hexadecimal:		08
Set Auto CR ON LF		ESC [(p)h
P	effect
20	auto CR on LF

113