|
|
|
|
| Genicom 3840 and 3410 ANSI Emulation |
Control Code: | ESC | [ | 2 | 0 | h |
Hexadecimal: | 1B | 5B | 32 | 30 | 68 |
Reset Auto CR ON LF |
|
|
|
| ESC [(p)l |
Resets mode set by ESC [20h. |
|
|
|
| |
Example: reset auto CR on LF |
|
|
|
| |
Control Code: | ESC | [ | 2 | 0 | l |
Hexadecimal: | 1B | 5B | 32 | 30 | 6C |
Horizontal Position Backwards |
|
|
| ESC [(p)j | |
Moves the horizontal position (p) decipoints left of the current position.
Actual distance between symbols separated by this command is the argument (p) minus the current horizontal pitch (text of graphics). For example, if you print an uppercase E at 10 cpi, move backwards by (p), and print another uppercase E, then the distance between leading edges of the two characters is (p) – 72 decipoints. If you print graphics at 72 dpi, move backwards by p, and print another graphics column, then the distance between the two graphics columns is (p) – 10 decipoints.
This command enables printing left of the left margin. Any data located left of the left print reference is discarded.
Example: ESC [1080j moves the horizontal position back by 1.5 inches.
Control Code: | ESC | [ | 1 | 0 | 8 | 0 | j |
Hexadecimal: | 1B | 5B | 31 | 30 | 38 | 30 | 6A |
Horizontal Position Absolute |
|
|
|
|
| ESC [(p)’ | |
Causes the print position to move (in decipoints) a specified distance from the left print reference.
Example: ESC [1080’ |
|
|
|
|
|
|
|
Control Code: | ESC | [ | 1 | 0 | 8 | 0 | ‘ |
Hexadecimal: | 1B | 5B | 31 | 30 | 38 | 30 | 60 |
Horizontal Position Relative |
|
|
|
|
| ESC [(p)a | |
Advances the current print position by the distance specified. Parameter p is specified in decipoints (720 decipoints = 1 inch).
Example: ESC [1080a advances the print position 1.5 inches
Control Code: | ESC | [ | 1 | 0 | 8 | 0 | a |
Hexadecimal: | 1B | 5B | 31 | 30 | 38 | 30 | 61 |
114
