ANSI X3.64 Emulation
Absolute Horizontal Tab | ESC [ n ` |
Sets the current print position to column n. The actual position will depend on the current character spacing. If n is less than the left margin, the active column will be set to the left margin. If n is greater than the right margin, then a line feed will be performed and the active column will be set to the left margin.
Example: The following escape sequence will set the active column to column 65.
Escape Sequence: | ESC | [ | 6 | 5 | ` |
Hexadecimal: | 1B | 5B | 36 | 35 | 60 |
Relative Horizontal Tab |
|
|
|
| ESC [ n a |
Advances the current print position by n columns. The actual distance moved will depend on the current character spacing. Equivalent to sending n spaces (SP).
Example: The following escape sequence will advance the active column by 10 columns. If current character spacing is 10 cpi, this will cause the print position to move one inch to the right.
Escape Sequence: | ESC | [ | 1 | 0 | a |
Hexadecimal: | 1B | 5B | 31 | 30 | 61 |
Vertical Position
Line Feed | LF |
(or) | IND |
(or) | ESC D |
Causes the current line to be printed, and then advances the paper one line at the current line spacing. If “Auto CR” is set to “On” in the interface setup menu, a carriage return will also be performed.
Control code: | LF |
|
Hexadecimal: | 0A |
|
Control code: | IND |
|
Hexadecimal: | 84 |
|
Escape Sequence: | ESC | D |
Hexadecimal: | 1B | 44 |
10
