Printek FormsMaster 8000se Series Relative Vertical Tab, Absolute Horizontal Tab, Jttd, Example

Printing Basic Bar Codes

Relative Vertical Tab

The sequence used to skip vertical space is

^Jttd
^J	Two Character Sequence Identifier for
	Relative Vertical Tab.
ttd	Vertical Distance, in Tenth Inches plus Dots.
	Range of tt is 00 to 99 (0.0 to 9.9 inches).
	Range of d is 0 to F (0 to 15 dots).

The distance specified is relative to the current vertical position.

Example:

To print multiple bar codes down the page. Each bar code is 0.2 inches high, and is separated from other bar codes by 0.1 inch of white space.

^H02^BNd01^G^-^J010^BNd02^G^-^J010^BNd03^G^-

Absolute Horizontal Tab

The sequence used for horizontal positioning is

^Ttttd
^T	Two Character Sequence Identifier for
	Absolute Horizontal Tab.
tttd	Horizontal Distance, in Tenth Inches plus Dots.
	Range of ttt is 000 to 136 (00.0 to 13.6 inches).
	Range of d is 0 to F (0 to 15 dots).

The horizontal position specified is an absolute distance, with respect to the left edge of the paper. Remember that a tenth of an inch is actually 14/144ths of an inch, so the actual distance tabbed may be slightly shorter than expected.

Example:

To print multiple bar codes across the page. Bar codes are printed approximately 0, 2, and 4 inches from the left edge of the paper.

143