|
| IBM Proprinter Emulation |
Escape Sequence: | ESC | 6 |
Hexadecimal: | 1B | 36 |
Print Single Character |
| ESC ^ n |
Prints the character n from the all characters chart. This sequence may be used to print a character that is normally treated as a control code.
Example: The following escape sequence will print a left arrow. This character is normally not printable, since it is treated as the ESC control code.
Escape Sequence: | ESC | ^ | ESC |
Hexadecimal: | 1B | 5E | 1B |
Print Characters |
|
| ESC \ n1 n2 |
Prints the next n1 + (n2 x 256) characters from the all characters chart. This sequence may be used to print characters that are normally treated as a control codes.
Example: The following escape sequence will print an up arrow, a down arrow, a right arrow, and a left arrow.
Escape Sequence: | ESC | \ | 4 | 0 | CAN | EM | SUB | ESC |
Hexadecimal: | 1B | 5C | 04 | 00 | 18 | 19 | 1A | 1B |
Select Print Mode |
|
|
|
|
|
|
| ESC I n |
Selects print mode n according to the following chart. Overrides the “Font” value in the forms menu.
nPrint Mode
0Draft
1Fast Draft 12 cpi
2Letter Quality
3Letter Quality
Example: The following escape sequence will select the IBM Proprinter letter quality font.
Escape Sequence: | ESC | I | 3 |
Hexadecimal: | 1B | 49 | 03 |
Line Pitch
Select 8 LPI | ESC 0 |
Sets the line spacing to 1/8 of an inch per line (8 lpi). Overrides the “Lines/Inch” value in the forms menu.
Escape Sequence: | ESC | 0 |
Hexadecimal: | 1B | 30 |
51