| Genicom 3840 and 3410 ANSI Emulation |
Graphics Density | ESC [(p1)q |
Sets the graphics density. The printer powers up with a graphics density of 72 x 72 dpi; changes are not stored in NVRAM.
p1 | horizontal density | vertical density |
|
| ||
0 | 72 dpi |
| 72 dpi |
|
|
|
1 | 144 dpi |
| 72 dpi |
|
|
|
Escape Sequence: | ESC | [ | 1 | 0 | q | |
Hexadecimal: |
| 1B | 5B | 31 | 30 | 70 |
Printer Control |
|
|
|
|
| |
Bell |
| BEL |
Causes the printer’s bell to sound. |
| |
Control Code: | BEL |
|
Hexa decimal: | 07 |
|
Control Sequence Introducer | CSI | |
The CSI character is the control function introducer for the ANSI control sequence. Control sequences are
Control Code: | CSI |
|
Hexadecimal: | 9B |
|
Oversized Font/Bar Code Mode | ESC [(p1)t | |
p1 effect
0reset special modes
1select oversized printing
3 | select bar code |
Oversized printing and bar codes are explained in separate chapters. Expanded printing is not supported.
Example: select oversized printing
Escape Sequence: | ESC | [ | 1 | t |
Hexadecimal: | 1B | 5B | 31 | 74 |
Reset |
|
|
| ESC c |
Recalls the user format presently assigned to the current paper path.
Escape Sequence: | ESC | c |
Hexadecimal: | 1B | 63 |
120
