Configuring
the Code 93
Options
Minimum Label Length
Use these special bar codes to configure the Code 93 options.
1.Identify the minimum length setting you want to make. The selectable range is 01 to 501 characters.
2.Scan the SET bar code.
3.Scan the SET MINIMUM LABEL LENGTH bar code.
4.Set the minimum label length by scanning the applicable digits from page 112. The range is 01 to 501 characters. Return to this page and go to step five.
If you are setting a label length less than ten, you
must scan a zero digit first and then the length
digit (e.g., 04, 06, 08).
NOTE
5.Scan the END bar code.
SET
Set Minimum Label
Length---------
END
1.For this symbology, the scanner will decode up to 50 characters, but the actual length read will vary depending upon interface type, and bar code physical size and quality. The IBM POS interface is limited to 32 character labels. Code 93 bar codes containing one or more shift characters can also limit the amount of characters that will be decoded (in these cir- cumstances, the scanner will decode at least 39 data characters).
Programming Guide | 111 |