Symbologies Supported
Symbology selection (bar code type) determines which symbologies the scanner will decode. The chart below shows the symbologies that are supported by each interface. Once you have identified the symbolo- gies you wish to enable, turn to the following pages, enable those sym- bologies and set the data format options (e.g. check digit, start/stop characters) required by your host system for each symbology type. You must enable the symbology format options settings that are compatible with your host system.
The factory settings for each interface were chosen to meet the standard industry requirements and in most cases you will not need to change the symbology format settings. If you are unsure of your system requirements, test the scanner using the factory settings before making any changes.
= Supports this symbology
INTERFACE TYPE
Wand Emulation
Keyboard Wedge
(all subtypes)
IBM Port 5B
IBM Port 9B
IBM Port 17
IBM Port E
*Wincor Nixdorf
SYMBOLOGIES SUPPORTED
MSI/Plessey
Standard 2 of 5/IATA
Code 93
UPC/EAN w/C128
UPC/EAN w P5
UPC/EAN w/P2
Codabar
Interleaved 2 of 5
EAN 128
Code128
Code 39/PharmaCode
60 | PowerScan™ Scanner |