Minimum Label Follow these steps to set Code 39 Minimum Label Length:
Length |
| Identify the minimum label length setting you want to make. | ||||
1. |
| |||||
|
|
| The selectable range is 00 to 481 characters. | |||
2. |
| Scan the SET bar code. | ||||
3. |
| Scan the SET MINIMUM LABEL LENGTH bar code. | ||||
4. |
| Set the minimum label length by scanning the applicable | ||||
|
|
| digits from the bar codes on page 70. Return to this page and | |||
|
|
| go to step five. | |||
|
|
|
|
|
|
|
|
|
|
|
| If you are setting a label length less than ten, |
|
|
|
|
|
|
| |
|
|
|
|
| you must scan a zero digit first and then the |
|
|
|
|
|
| length digit (e.g., 04, 06, 08). |
|
|
| NOTE |
| |||
|
|
|
| |||
|
|
|
|
|
|
|
5.Scan the END barcode.
Minimum Label Length
SET
Set Minimum Label
Length---------
END
1.For this symbology, the scanner will decode up to 48 characters, but the actual length read will vary depending upon interface type, and bar code physical size and quality. Code 39 bar codes containing one or more full ASCII characters can also limit the amount of characters that will be decoded (in these circumstances, the scanner will decode at least 24 data char- acters).
Programming Guide | 69 |