PSC PowerScan If You Make a Mistake, Return to Factory Settings

If You Make a Mistake...

If, during a programming session, you find that you are unsure of the scanner’s settings or wish to reset the scanner’s configuration, use the Return to Factory Settings label below to return the scanner’s configuration to the factory settings. Scanning this label will also reset any changes made during previous programming sessions.

Return to Factory Settings

Scan this label to return the scanner to the default settings configured at the factory. This label is typically used to return the scanner to a “known” operating state when the present programming status is not known, faulty, or suspect.

	Use this label with caution, since it will reset
	ALL features that may have been programmed
	for that interface type since the scanner’s
CAUTION	installation.

SET -------------------------------------------

Return to Factory Setting ---------

END ------------------------------------------

If you don’t have a record of your site/system’s original configuration, you may need to contact your sale representative for assistance to return the scanner to normal function. Please be prepared to provide information about the company, location, host terminal system and other pertinent information about the scanner being repaired.

12 PowerScan™ Scanner