Configuring

the Code 128/

and UCC/EAN

128 Options

Minimum Label Length

Use the bar codes in this section to configure the Code 128 and UCC/ EAN 128 options.

Follow these steps to set Code 128 and UCC/EAN 128 Minimum Label Length.

1.Identify the minimum length setting you want to make. The selectable range is 00 to 501 characters.

2.Scan the SET bar code on page 75.

3.Scan the SET MINIMUM LABEL LENGTH bar code.

4.Set the minimum label length by scanning the applicable digits from the bar codes on page 76. Return to this page and go to step five

If you are setting a label length less than ten,

you must scan a zero digit first and then the

length digit (e.g., 04, 06, 08).

NOTE

5.Scan the END bar code

Minimum Label Length

SET ------------------------------------------

Set Minimum Label

Length---------

END ------------------------------------------

1.The scanner will decode up to 50 characters, but the actual length read will vary depending upon interface type, the physical size of the bar codes, print quality and whether the bar code data consists of Code 128 code set A, set B, or set C characters. (The C128 character set C allows for more densely packed data, thus if the bar code includes all or mostly C128 set C characters, more characters can be decoded).

Programming Guide

75