LED and Beeper Indicators
The scanner provides a set of indicators that verify/announce the various scanner functions.
LED Indicators The Amber “Laser ON” LED (located on top rear of scanner)
-lights whenever laser power is on.
The Green “Good Read” LED (also located on top rear of scanner)
-Flashes1 once to indicate when a “good read” has occurred.
-Flashes1 slowly on and off to indicate the scanner is in Pro- gramming Mode.
The Beeper While in Scanning mode...
-Sounds1 four times at
-Sounds1 once following a “good read.”
-Sounds1 six rapid “chirps” to indicate an error (error tone).
While in Programming mode...
-Sounds1 one time when entering/exiting the Programming Mode.
-Sounds1 three times to indicate a successfully programmed feature.
1.The green LED and Beeper are configurable features and may have been modified or disabled at an earlier programming session. See the section in this manual titled General Features for more details.
Programming Guide | 11 |