Connect to a Laptop/No Keyboard Attached

If no keyboard is attached, the scanner must provide the acknowledge signal to the PC. In this case, enable the "Laptop/No External Key- board" mode. If a keyboard is attached, enable "Keyboard Attached."

Laptop (integrated keyboard) -provides the acknowledge signal to the PC when the scanner is connected to a laptop computer or when the scanner is operated with no external keyboard.

PC (external keyboard) - is enabled when the scanner is connected to a standard PC."

Send Control Characters - transmits all ASCII characters except NUL (00h) . Disabling this feature limits transmission of ASCII characters to the following:

•Only ASCII characters between 20h..127h, plus.

-Carriage Return (CR=0Dh)

-BackSpace (BS=08h)

-Right Tab (HT=09h)

-Left Tab (0Bh)

-Esc (1Bh)

Send Function Character - transmits characters between 00H - IFH which are not in the normal ASCII set.

Scan the bar code belows below to select the applicable option for connecting to a laptop or PC.

SET -------------------------------------------

Connect to Laptop or PC

Laptop/No external

Keyboard---------

Keyboard Attached ---------

36

PowerScan™ Scanner