Psion Teklogix 9160 G2 Wireless Gateway User Manual 119
Chapter 11: Maintenance And Monitoring
Interfaces
Important: The maintenance and monitoring tasks described here all pertain
to viewing and modifying settings on specific access points; not on
a cluster configuration that is automatica l ly shared by multiple
access points. Therefore, it is important to e n sure that you are
accessing the Administration Web pages for the particular access
point you want to configure. For information on this, see “Navi-
gating To Configuration Information For A Specific AP And
Managing Standalone APs” on page62.
11.1 Interfaces
To monitor wired LAN and wireless LAN (WLAN) settings, navigate to Status >
Interfaces on the access point you want to monitor.
Note: On a two-radio access point, current wireless sett ings for bot h Radi o One
and Radio Two are shown. On a one-radio access point, settings are
shown for one radio. The Interfaces page for a two-radio AP is shown in
the following figure.
This page displays the current settings of the 9160 G2 Wirele ss Gateway. I t displays
the Ethernet (Wired) Settings and the Wireless Settings.