![](/images/new-backgrounds/1330702/33070285x1.webp)
| Using the Basic Features of Your Phone |
|
|
Note |
|
You can also dial using the SIP URL or IP address. To obtain the IP address of your | |
| phone, press the Menu key, and then select Status > Platform > Phone. The IP |
| address is listed together with other phone information. The maximum URL or IP |
| address length is 32 characters. For example, 10.3.0.42, sip:jane@polycom.com . |
| Press the URL soft key and enter the URL or IP address. Use * for “.” and # for “@”. |
| Then press the Send soft key to complete the call. |
| Your phone may not support SIP URL or IP address dialing. Contact your system |
| administrator. |
|
|
| To place a call using |
Note |
|
If “Handsfree mode disabled” appears on the screen after you press the | |
| speakerphone key, your system administrator has disabled the speakerphone on |
| your phone. |
|
|
>>Do one of the following:
— With the handset | , | , or the |
NewCall soft key to obtain a dial tone. |
|
|
Dial the number using the dial pad.
—With the handset
Press | , | , or the Dial soft key. |
To place a call using the headset:
>>Do one of the following:
— With the optional headset connected, press | or the |
NewCall soft key to obtain dial tone. |
|
Press .
Dial the desired number using the dial pad.
—With the optional headset connected, dial the desired number using the dial pad.
Press .
Note | To permanently enable your headset, refer to Enabling the Headset Memory Mode |
| on page |
|
|
3 - 3