Q-Logic 3100, 3000 manual Reboot the system

B–Flash Update

QLogic Adapter Flash Update—Windows Server

Here is an example of the Windows Server nxflash --alloutput for local area connection 8:

C:\netxen\4.0.223\utils>nxflash -i "Local Area Connection 8" --all

NETXEN Port is Port 0 Verifying flash...Done. 0/9 - Init

*** Currently in flash ***

Board Type	: Quad Gig LP
Firmware Version : 4.0.222
MAC Address 0	: 00:0E:1E:00:7F:24
MAC Address 1	: 00:0E:1E:00:7F:25
MAC Address 2	: 00:0E:1E:00:7F:26
MAC Address 3	: 00:0E:1E:00:7F:27
Serial Number	: QG88BK0130

NIC binary romimage found in C:\netxen\4.0.223\utils

Rom	Image	:
C:\netxen\4.0.223\utils\lp_qg_cut_thru_b1_romimage
1/9	- Extracting	Romimage
Firmware version		From Board: 4.0.222
Firmware version		From Romimage: 4.0.223

WARNING: This operation will take the NIC off line.

Do you wish to upgrade? (Y/N) y

5.Reboot the system.

6.Type the following command to verify that the Flash has been updated (n is the number of the port being Flashed):

nxflash.exe -i “Local Area Connection n” --info (The quotation marks are required.)

B-6 NE0154601-00 B