Q-Logic 3100, 3000 manual Table A-1. Diagnostic Utility Commands Continued, Description

A–Diagnostic Utility Commands

Table A-1. Diagnostic Utility Commands (Continued)

Command	Description
-nR	This command disables control register testing (use with -Dor
--noCRegs	-a).
-nF	This command disables Flash testing (use with -Dor -a).
--noFLASH
-nl	This command disables interrupt testing (use with -Dor -a).
--noIRQS
-nL	This command disables internal loopback testing (use with -Dor
--noIntLB	-a).
-nH	This command disables hardware testing (use with -Dor -a).
--noHw
-nS	This command disables link status testing (use with -Dor -a).
--noLinkSt
-nl	This command disables LED status testing (use with -Dor -a).
--noLED
-E	This command performs an external full-duplex loopback test.
--ExtLB
-h	This command prints the help message.
--help
-v	This command displays version information.
--version
-C	This command performs an interface status test.
--Cmdif	NOTE: This command is valid only in Linux.

A-2 NE0154601-00 B