Q-Logic 3000 A Diagnostic Utility Commands, Table A-1. Diagnostic Utility Commands, Description

A Diagnostic Utility

Commands

Table A-1lists user-level diagnostic utility commands for the Linux and Windows Server OSs.

	Table A-1. Diagnostic Utility Commands
Command		Description
-i		This command specifies the interface type (Local Area Connec-
--interface		tion 1, Local Area Connection 2, etc.).
-a		This command performs all tests, regardless of the default.
--all
-D		This command performs only the default test.
--default
-R		This command tests all control registers (default).
--CRegs
-F		This command tests the Flash (default).
-FLASH
-I		This command tests the interrupt mechanism (default).
--IRQS
-L		This command performs an internal loopback test (default).
--IntLB
-H		This command performs a hardware test (default).
--Hw
-S		This command tests the link status (default).
--LinkST
-l		This command tests the LEDs (default).
--LED

NE0154601-00 B A-1