Q-Logic 3000, 3100 manual QLogic Adapter Configuration, 2. Network Connections Window

7–Windows Server 2003, 2008, and 2008 R2 Driver Configuration QLogic Adapter Configuration

The Information tab contains information about the firmware version, BIOS version, driver version, and other QLogic adapter properties.

The Diagnostics tab tests the QLogic adapter’s Flash, LED, and other functions.

The Statistics tab displays information about the QLogic adapter.

The Flash update tab displays the current firmware version on the QLogic adapter. You can update the firmware (if required).

The Driver tab displays driver information. From this tab, you can update, uninstall, or restore a previous version of the QLogic adapter driver.

The Details tab displays detailed information about the QLogic adapter.

The Resources tab displays the resource settings for the QLogic adapter.

QLogic Adapter Configuration

To enable the connections to the QLogic adapter:

1.Open the Network Connections window in the Control Panel, or directly from the desktop if the icon exists (Figure 7-2).

Figure 7-2. Network Connections Window

If an IP address has not been assigned, the QLogic adapter entry says

Limited or no connectivity.

NE0154601-00 B 7-9