Q-Logic 3000 QLogic Adapter Diagnostic Tests, 4. Internet Protocol TCP/IP Properties Dialog Box

7–Windows Server 2003, 2008, and 2008 R2 Driver Configuration QLogic Adapter Diagnostic Tests

The Internet Protocol (TCP/IP) Properties dialog box opens (Figure 7-4).

Figure 7-4. Internet Protocol (TCP/IP) Properties Dialog Box

4.Assign the appropriate IP, subnet mask, and default gateway values in the Internet Protocol (TCP/IP) Properties dialog box, and then click OK.

5.Verify connectivity with another card or switch using the ping utility.

QLogic Adapter Diagnostic Tests

The Windows user diagnostics utility performs different tests using the nxudiag.exe command. The syntax for these tests is:

nxudiag.exe [command-options-and-arguments]

See Table A-1for a list of Windows diagnostic command options and arguments. The QLogic adapter will be offline at this time.

NE0154601-00 B 7-11