Q-Logic 3000, 3100 manual Hardware Installation, QLE3044 Installation, 1. QLE3044 Port Assignments

4 Hardware Installation

This section provides installation instructions for the QLogic adapters. Please follow all applicable ESD precautions when handling the QLogic adapter.

QLE3044 Installation

To install the QLE3044:

1.Verify that the system is powered off and unplug the power cord.

2.Remove the system cover.

3.Locate an empty x4 or higher PCIe® slot.

4.Insert the QLE3044 into the PCIe slot. Apply uniform pressure on top of the QLE3044 until it is firmly seated in the PCIe bus connector.

5.Secure the bracket to the chassis and replace the cover.

6.Connect the appropriate cables to the QLE3044.

7.Plug in the power cord and power up the system.

The QLE3044 contains four ports that are organized as shown in Figure 4-1. Note that the portion of the bracket covering the four RJ45 jacks is not shown.

Port 1

Port 2

Port 3

Port 4

RJ45

RJ45

RJ45

RJ45

Figure 4-1. QLE3044 Port Assignments

NE0154601-00 B 4-1