Q-Logic 3000, 3100 manual Quick Start, QLogic Adapter Installation and Verification

3 Quick Start

This section provides instructions for advanced users who are already familiar with hardware and software installation procedures. See the appropriate section, as applicable:

“QLogic Adapter Installation and Verification” on page 3-1

“Windows Server Driver Installation” on page 3-2

“Linux Driver Installation” on page 3-4

QLogic Adapter Installation and Verification

The following sections provide high-level instructions for installing the QLogic adapter. For more detailed instructions, see “Hardware Installation” on page 4-1.

Pre-installation Checklist

Before installing the QLogic adapter:

1.Verify that the system meets the requirements specified in “System Requirements” on page 2-1.

2.Power down the system.

QLogic Adapter Installation

To install the QLogic adapter:

1.Insert the QLogic adapter into an available PCI Express® slot.

2.Connect the appropriate cables to the QLogic adapter.

3.Power up the system.

For more information on the QLogic adapter installation, refer to “Hardware Installation” on page 4-1.

NE0154601-00 B 3-1