Q-Logic 3000, 3100 manual Suse

3–Quick Start Linux Driver Installation

2.Type the following command to install the RPM source: rpm -ivnx_nic-[version].src.rpm

3.Type the following command to build the binary RPM:

rpmbuild -bb /usr/src/redhat/SPECS/nx_nic-[version].spec

4.Type the following command to install the binary RPM:

rpm -ivh /usr/src/redhat/RPMS/[arch]/nx_nic-[version].[arch].rpm

The [arch] variable designates the system architecture. Some [arch] variables are i386, i586, i686, x86_64, depending on the system.

5.Type the following command to install the tools RPM: rpm -ivhnx_tools-[version].rpm

6.Type the following command to load the driver: modprobe -v nx_nic

SUSE®

To install the driver on a SUSE system:

1.Type the following command to extract the driver:

tar -zxvf qle30xx_qle31xx-src-[version].tar.gz

2.Type the following command to install the RPM source: rpm -ivnx_nic-[version].src.rpm

3.Type the following command to build the binary RPM:

rpmbuild -bb /usr/src/packages/SPECS/nx_nic-[version].spec

4.Type the following command to install the binary RPM:

rpm -ivh /usr/src/packages/RPMS/[arch]2/nx_nic-[version].[arch].rpm

The [arch] variable designates the system architecture. Some [arch] variables are i386, i586, i686, x86_64, depending on the system.

5.Type the following command to install the tools RPM: rpm -ivhnx_tools-[version].rpm

6.Type the following commands to load the driver:

modprobe firmware_class modprobe -v nx_nic

NE0154601-00 B 3-5