Q-Logic 3100, 3000 manual 8. QLE3142 Bracket Replacement

4–Hardware Installation QLE3142 Installation

2.Remove the two screws at the top and bottom of the QLE3142 that hold the bracket in place.

3.Gently pull the bracket away from the QLE3142 until it disconnects from the optical module housings.

4.To replace with a different bracket, reverse the process, sliding the new bracket over the module housings (see Figure 4-8). Note that the screw mounting tabs on the bracket go on the solder side of the QLE3142. Fasten the bracket in place with the two screws.

2. Fasten the two mounting screws.

QLE3142

Housing

Housing

1.Attach the new bracket. The two optical module cutouts on the bracket slide over the housings on

the QLE3142. The mounting screw tabs on the bracket should line up with the mounting screw holes

on the QLE3142. Note that the tabs will be on the solder side of the board.

Figure 4-8. QLE3142 Bracket Replacement

4-6 NE0154601-00 B