Q-Logic 3100, 3000 manual 1. Advanced Properties Parameters Continued, Description

7–Windows Server 2003, 2008, and 2008 R2 Driver Configuration NIC Driver Properties and Configuration

Table 7-1. Advanced Properties Parameters (Continued)

Parameter	Description
UDP Checksum Offload IPv4	This parameter enables/disables the UDP checksum
	offload. There are four UDP checksum options (val-
	ues):
	0: Off
	1: Transmit
	2: Receive
	3: Transmit/receive
	 Registry Key: UDPChecksumOffloadv4
	 Default: 3 (Transmit and receive checksum
	enabled)
	 Values: 0, 1, 2, 3
UDP Checksum Offload IPv6 a	This parameter enables/disables the UDP checksum
	offload. There are four UDP checksum options (val-
	ues):
	0: Off
	1: Transmit
	2: Receive
	3: Transmit/receive
	 Registry Key: UDPChecksumOffloadv6
	 Default: 3 (Transmit and receive checksum
	enabled)
	 Values: 0, 1, 2, 3
VLAN ID	This parameter sets the VLAN ID for this interface
	(also exposed through the standard OID).
	 Registry Key: VlanId
	 Default: 0 (no VLAN)
	 Max: 4094
	 Min: 0
	 Step: 1
	 Range: 0–4094
Table Notes

aWindows Server 2008 only

7-8 NE0154601-00 B