Quadra-Fire VOYAGEUR-MBK B. Optional Elbow Flue Adapter Installation, D.Leveling Legs, Figure

R

VOYAGEUR Wood Insert

B. Optional Elbow Flue Adapter Installation C. Securing Stove Pipe/Liner to Flue Collar

Optional use of a Simpson Duravent 15° Universal Elbow Part Number 4615 may be purchased directly through your local Simpson Durvent Pipe Distributor or from your local Quadra-Fire dealer, Part Number DV-4615.

Figure 41.1 shows a vertical installation and also how to create an optional 30° elbow installation.

The 15° elbow may be secured directly to the fl ue collar. Follow the pipe manufacturer’s instructions for using screws or rivets for attachment. Most pipe manufacturer’s 6 inch (152mm) diameter fl ue liners may be attached directly to the top of the 15° elbow.

1.There are 4 pre-drilled holes in the fl ue collar 90 degrees apart. Attach the fl ue collar to the stove pipe/liner. If the seal is questionable use stove mastic Figure 41.2.

2.Attach gasket to bottom side of fl ue collar with a thin coat of silicone.

A

Vertical B

A

30o

30 degree B

Figure 41.1

Gasket

Flue Collar Stove Pipe/Liner

Figure 41.2

D.Leveling Legs

1.Remove the 2 screws already installed on each leg.

2.Move legs to the desired height.

3.Re-install the screws to secure in place.

Flue	A	B
Adapter
Vertical	13-9/16 in. (344mm)	20-15/16 in. (532mm)
30 Degree	14-5/8 in. (371mm)	20-11/16 in. (525mm)

Remove 2 screws from both sides. Adjust the legs up or down to level appliance.

Figure 41.3

November 22, 2011 7063-173D Page 41