R

VOYAGEUR Wood Insert

Figure 45.1

4.Remove the 2 screws at the top of the control plate. Push the bottom of the control plate to the inside of the appliance and partially remove the control plate assembly.

Green Grounding

Wire

Remove Screw

Figure 45.4

6.Remove the screw that is holding the ground lug to the control plate.

WHITE WIRE

BLACK WIRE

Figure 45.2

Figure 45.5

7. Use needle nose pliers to remove the strain relief that protects the power cord from the control plate.

5. Locate the black and white wires that are part of the power cord and disconnect those wires from the wire harness.

Placement Slot

Blower Access

Assembly

Grille hinges

Hold Down

downward

Bracket

 

Figure 45.3

Snap Disc Bracket

Blower Control Plate

Remove Screws &

 

Pull Access Assembly

Remove Screws from Hold Down

away from Insert

Bracket and Pull Blower Assembly

 

 

Forward. Do not Remove Blower from

 

the Hold Down Bracket

November 22, 2011

7063-173D

Page 45

Page 45
Image 45
Quadra-Fire VOYAGEUR-MBK, VOYAGEUR-PMH owner manual Placement Slot Blower Access Assembly