DLT VS80 Tape Drive Installation and Operations Guide

5.Connect the other end of the SCSI cable to the connector on your SCSI host bus adapter, as shown in Figure 3-4or to the connector on the previous SCSI device on the SCSI bus.

Host bus adapter

SCSI cable

Figure 3-4.Workstation SCSI Cable Connections

NOTE: If the SCSI cable does not fit the connector on the SCSI host bus adapter, you either have an incompatible SCSI host bus adapter or you need to purchase a cable adapter. Contact Quantum Corporation or your SCSI host bus adapter manufacturer for information.

001596-01 Rev A07

May 2004

3-7

Page 21
Image 21
Quantum DLT VS80 manual Workstation Scsi Cable Connections