Quantum LTO-3 manual Jumpers, Jumper Settings

Chapter 2 Installation

Installing an Internal LTO-3 Tape Drive

and 7–8 to change the SCSI ID of the LTO-3 Tape Drive (see table 1 and table 2), or assign a unique SCSI ID to the other SCSI device.

Note: The SCSI controller or host adapter generally uses ID 7. In some systems, the boot drive uses ID 0 or ID 1. Avoid setting your drive’s SCSI ID to these settings.

Figure 2 Internal

LTO-3 Tape Drive

Jumper Settings

Drive Configuration Jumpers Pins

Drive Configuration

Jumpers Pins

Default

Settings:

Pins: Function:

1-2 SCSI ID bit 0

3-4 SCSI ID bit 1

5-6 SCSI ID bit 2

7-8 SCSI ID bit 3

9-10 Reserved

11-12 Termination Power

Jumper Settings

SCSI ID=0	SCSI ID=8
SCSI ID=1
	SCSI ID=9
SCSI ID=2	SCSI ID=10
SCSI ID=3	SCSI ID=11
SCSI ID=4	SCSI ID=12
SCSI ID=5	SCSI ID=13
SCSI ID=6	SCSI ID=14
SCSI ID=7	SCSI ID=15
	Term. power

Table 1 ISCSI IDs and Jumper Settings for an Internal LTO-3 Tape Drive

	Jumpers
SCSI ID	1–2	3–4	5–6	7–8
0	Open	Open	Open	Open
1	Shunted	Open	Open	Open

LTO-3 Tape Drive User’s Guide 9