Quantum LTO-3 manual ADI Free Cable Connector

Chapter 2 Installation

Installing an Internal LTO-3 Tape Drive

Figure 6 ADI Free

Cable Connector

When the ADI free cable connector is used on both ends of a cable, like- numbered pins shall be connected together, that is, pin 1 on end A is wired to pin 1 on end B, pin 2 on end A to pin 2 on end B, and so forth.

Connecting a SCSI The internal LTO-3 Tape Drive has an Ultra 160 SCSI interface,

Cableterminated by a 68-pin LVD SCSI connector. Use the following procedure to connect a SCSI cable to this connector.

1Turn off all power to the drive and the computer.

2Attach the SCSI interface cable to the 68-pin SCSI interface connector on the back of the drive (see figure 7).

14 LTO-3 Tape Drive User’s Guide