Connecting a Power Cord

Installing the LTO Driver

Registering Your Tape Drive

Chapter 2 Installation

Installing a Desktop LTO-3 Tape Drive

Attach the power cord securely to the power connector on the back of the desktop LTO-3 Tape Drive (see figure 9).

If you intend to use your drive with either the Microsoft Windows Server 2003, Windows XP, or Microsoft Windows 2000 operating system, install the LTO driver. See the Resource CD. This driver is not necessary with

commercial backup application software.

After you install the desktop tape drive, be sure to register it. Registering your drive ensures that you will receive the latest information about your drive, as well as other product, service, and support information. For your convenience, you can register your drive through our Web site at www.quantum.com/registration.

LTO-3 Tape Drive User’s Guide

21

Page 35
Image 35
Quantum LTO-3 manual Commercial backup application software