Quantum manual Rear View of the Internal LTO-3 Tape drive

Chapter 2 Installation

Installing an Internal LTO-3 Tape Drive

Figure 7 Rear View of the Internal LTO-3 Tape drive

Pin 1
		Power
	68-pin SCSI	connector
Serial Library	connector	Drive configuration
Port		jumper pins

Caution: Install an LVD drive only in an LVD environment.

Checking the SCSI The Internal LTO-3 Tape Drive does not provide SCSI termination. You

Termination must place a SCSI bus terminator or a SCSI device with termination enabled at the end of the SCSI chain. Two examples of SCSI termination are shown in figure 8.

The Internal LTO-3 Tape Drive provides terminator power if a jumper is placed on the termination power jumper pins (see Terminator Power).

LTO-3 Tape Drive User’s Guide 15