Quantum Instruments DLT 7000 manual Lsb Tsd Etc Tmc, Msb

SCSI Commands

LOG SENSE Command (4Dh) (continued)

Bit	7	6	5	4	3	2	1	0
Byte
	(MSB)
0 -1				Parameter Code

(LSB)

2	DU	DS	TSD		ETC	TMC	Rsv’d	LP
3					Parameter Length
	(MSB)
4 - n				Hex ASCII String for Event n

(LSB)

Figure 5–21 Log Parameters Format for Last n Error Events LOG SENSE Page

Table 5–23 Log Parameters for Last n Error Events LOG SENSE Page Field Descriptions

Field Name	Description
Parameter Code	Parameter Code values are assigned from 0 to 27 (decimal), where 0 is the
	oldest event stored and the highest Parameter Code returned is the most
	recent event.
Hex ASCII String	The text of the parameter includes a “Packet #” that is a value from 0 to
for Event n	255. This internal number is assigned when the packet is written to
	EEPROM. A value of 0 is normally the oldest packet, but packet numbers
	can wrap around back to 0 after reaching 255. For a detailed description of
	the packet string, see Appendix B.

Quantum DLT 7000 Tape System 5-49