Quantum Instruments DLT 7000 manual Eeprom Vendor Unique Page Parameters

SCSI Commands

MODE SELECT (6) / (10) Command (15h) / (55h) (continued)

Table 5–47 EEPROM Vendor Unique Page Parameters

Name	Value	Default	Length	Usage
	Rep.		(Bytes)
VENDORID	ASCII	QUANTUM	8	Vendor Identification field in INQUIRY
				Data
PRODUCTID	ASCII	DLT 7000	16	Product Identification field in INQUIRY
				Data
CACHETMS	ASCII	0	1	0,1 = Do not cache filemarks unless
	Decimal			IMMED bit is set (if set)
				2 = Cache if not two in a row unless
				IMMED bit is 1.
				3 = Always cache filemarks.
DEFAULTCOMPON	ASCII	1	1	0 = Compression defaulted OFF at
	Binary			power-up/reset
				1 = Compression defaulted ON at power-
				up/reset
DEFIXEDBLKEN	ASCII	0	8	Default fixed block size
	Decimal
DEFSEW	ASCII	1	1	To set default SEW parameter.
	Binary
DISDEFERCLNRPT	ASCII	0	1	When set, a cleaning report is sent over
	Binary			the library port as soon as the cleaning
				light illuminates. If this parameter = 0,
				then the report is sent only at unload.
DISLDRAUTODMC	ASCII	1	1	To partially disable sequential loading
	Binary			with loader if any media loader command
				has been received.
DISUNBUFMODE	ASCII	0	1	The drive disables unbuffered mode, i.e.,
	Binary			it ignores the MODE SELECT “buffered
				mode” selection to turn off buffered
				mode (if set).

Quantum DLT 7000 Tape System 5-91