Quantum Instruments DLT 7000 manual LED Functionality, Led

			Hardware Implementation
			Table 2–6 LED Functionality
	LED	LED Color	Description
	Operate Handle	Green	On = Insert/Release handle can be operated.
			Off = Do not operate Insert/Release handle.
			Blinking = Close the Insert/Release handle and wait for Operate
			Handle LED to light steadily.
	Density -	Amber	Refer to Table 2-7 and subsection 2.4.2.
2.6, 6.0,
10.0/15.0, 20.0
	Compress	Amber	On = Compression mode enabled (compression only valid for
			10, 15, or 20 or 35 GB densities only).
			Off = Compression mode disabled.
			Blinking = Compress mode manually overridden by operator.
	Density Override	Amber	On = Operator selected a density from the density Select
			Button on the front panel.
			Off = Density to be selected by the host (automatic).
			Refer to subsection 2.4.2 for Density Select information.
	Write-Protected	Orange	On = Tape is Write-Protected
			Off = Tape is Write-Enabled
	Tape In Use	Amber	Irregular Blinking = Tape is moving; the drive is calibrating,
			reading, writing, or rewinding the tape.
			Regular Blinking = The tape is loading, unloading, or
			rewinding.
			On = A cartridge is loaded in the tape drive, but the tape is not
			moving; the drive is ready for use. This may also mean no
			application is communicating with the tape drive’s controller,
			or that the application is communicating but is not delivering
			any command that impact tape motion.
			Off = No tape is loaded.

Quantum DLT 7000 Tape Drive 2-17