Quantum Instruments DLT 7000 manual Vendor Unique Inquiry Data

SCSI Commands

INQUIRY Command (12h) (continued)

Table 5–9 Standard Inquiry Data Page - Field Descriptions (continued)

Field Name	Value	Description
Sync	1	The drive supports Synchronous Data Transfers.
Linked	1	Linked Commands are supported.
CmdQue	0	The drive does not support Tagged Command Queuing.
SftRe	0	The drive implements the hard reset option in response to
		assertion of the SCSI Bus reset line.
Vendor Identification		The value in this field is QUANTUM (there are spaces after the
		word Quantum)
Product Identification		The value in this field is DLT 7000 (there are spaces after the
		word DLT 7000)
Product Revision Level		This field contains 4 bytes of ASCII data that provides the
		drive’s software revision levels. The first two bytes are the
		version number of servo code. The second two bytes are the
		version number of the SCSI/read/write code. When a firmware
		update is performed on the DLT drive, this part of the revision
		level will change to reflect that update (quotation marks will
		not appear).
Vendor Specific		See Section 5.4.2 for details.

NOTE: Vendor Information, Product Identification, and Product Revision Level are returned as shown in Figure 5–5.

5.4.2 Vendor Unique Inquiry Data

The following information can be used to precisely identify the revision of subsystem components.

Quantum DLT 7000 Tape System 5-19