Quantum Instruments DLT 7000 manual Ldrcyclreset, Loaderlun, Longxportpage

SCSI Commands

MODE SELECT (6) / (10) Command (15h) / (55h) (continued)

Table 5–47	EEPROM Vendor Unique Page Parameters (continued)
Name	Value	Default	Length	Usage
	Rep.		(Bytes)
HOSTCOMPSETTING				0 = Use default compression setting (use
(continued)				with PERFMODE set to 1 for best
				performance with DLT 7000 tape drive
				with 4MB cache)
				1= Set compression setting for best
				performance
				2 = Set compression setting for best
				compromise of performance and
				compression
				3 = Set compression setting for best
				compression
				Default compression settings are:
				- Drive with an 8 MB cache, compression
				= 1
				- Drive with a 4 MB cache, compression
				setting depends on the PERFMODE
				parameter. If : PERFMODE = 0, the
				compression setting is 5; PERFMODE =
				1, the compression setting is 1
LDRCYCLRESET	ASCII	0	1	To cause the first cartridge to be loaded if
	Binary			unloading the last cartridge when the
				loader product is operated in sequential
				mode (if set).
LOADERLUN	ASCII	1	1	1 - 7 = LUN to report media loader
Decimal				device on.
LONGXPORTPAGE	ASCII	1	1	To report 18 or 6 bytes medium transport
	Binary			element status descriptor if parameter is
				on or off.

5-94 Quantum DLT 7000 Tape System