ARC-101Installation & Operation Manual

Chapter 2. Installation

 

 

AC Power

Connection

Warning

The ARC-101's power connector is located on its rear panel (see Figures 2-6and Figure 2-7).

AC power should be supplied to the ARC-101 through a 1.5 m (5 ft.) standard power cord terminated by a grounded 3-wire plug.

When applying AC power, first connect the plug of the AC cable to the power connector on the rear panel of the ARC-101 and then to the mains outlet.

Grounding

Warning

Interrupting the protective (grounding) conductor (inside or outside the instrument) or disconnecting the protective earth terminal can make this instrument dangerous. Intentional interruption of the grounding conductor is prohibited.

Figure 2-6 ARC-101 Rear Panel (AC Version)

Figure 2-7 ARC-101 Rear Panel (DC Version)

ARC-101 Modules

2-5

Page 21
Image 21
RAD Data comm ARC-101 operation manual AC Power Connection, Grounding