Chapter 2. InstallationARC-101Installation & Operation Manual
E1 and E1/LTU | The E1 link interface (Coax/UTP), as well as RX/TX ground reference, can be |
Modules | determined by jumpers on the module (see Figure |
Figure |
|
Connector: | BNC |
Used with: | Coax (UTP) |
Protocols supported: | E1 |
Coding method: | HDB3 |
Impedance: | 75 Ω (120 Ω) |
Receive level (with LTU): | 0 to |
Receive level (without LTU): | 0 to |
Transmit level balanced: | 3v ± 10% |
Transmit level unbalanced: | 2.37v ± 10% |