RAD Data comm MBE10-8D Physical Description, Dual Image Flash Memory, Front Panel, Rear Panel

Chapter 1 Introduction MBE Family Installation and Operation Manual

configuration. If traffic exceeds the defined threshold, the second ISDN line will be connected.

Dual Image Flash Memory

Two different versions of software may be saved in two different partitions. At reset, MBE automatically runs the software stored in the primary partition. New software versions are stored in the secondary partition. If the software download is successful, the secondary partition becomes primary, and MBE resets, automatically running the new software version. If the download is not successful, the previous software version will continue to run.

1.2 Physical Description

MBE is a standalone unit. Figure 1-1shows the 3-D view of an MBE product.

Figure 1-1. MBE Product 3-D View

Front Panel

The front panel includes LEDs indicating operational and traffic status, a Control interface for connection to a management terminal, and a Reset button for resetting the device (see Chapter 3, Operation).

Rear Panel

The rear panel contains a socket for connection to a 100–240 V, 50/60 Hz power source. It also includes LINK interfaces for connecting MBE to a communication

1-4 Physical Description

Order from: Cutter Networks Ph:727-398-5252/Fax:727-397-9610 www.bestdatasource.com