RAD Data comm MBE10-8, MBE10-1D Package Contents, Equipment Needed, Installation and Setup

Chapter 2 Installation MBE Family Installation and Operation Manual

2.3 Package Contents

The following items are included in the MBE product packaging:

•One MBE standalone unit

•Control cable with RJ-45 connector – CBL-RJ45/D9/F/6FT

•AC power cord

•MBE Family Installation and Operation Manual

•LAN RANger Series Configuration Guide.

2.4 Equipment Needed

The following equipment is required to install the MBE:

•ASCII terminal or PC terminal emulator

•CBL-RJ45/D9/F/6FT control cable with RJ-45 connector (supplied with the device) for connection to the configuration terminal.

2.5 Installation and Setup

MBE is a standalone unit intended for tabletop or bench installation. It is delivered completely assembled. No provision is made for bolting the unit on the tabletop.

To install the MBE unit:

1.Determine the required configuration of MBE and set the internal jumpers accordingly.

2.Connect the line (see Connecting the Interfaces below).

3.Connect the LAN (see Connecting the LAN below).

4.Connect power to the unit (see Connecting the Power below).

Access to the inside of the equipment is permitted only to authorized and qualified personnel.

To avoid accidental electric shock, always disconnect the interface cables and power cord before removing the unit from its casing.

Any adjustment, maintenance or repair of the opened instrument under

voltage must be avoided as much as possible, and when inevitable, should be Warning carried out only by a skilled technician who is aware of the hazards involved.

2-2 Installation and Setup

Order from: Cutter Networks Ph:727-398-5252/Fax:727-397-9610 www.bestdatasource.com