MBE Family Installation and Operation Manual | Chapter 3 Operation |
|
|
Power-on
To power-up MBE:
1. Set the POWER switch on the rear panel to the ON position.
The POWER indicator lights up, indicating that MBE is powered on. After about 1 minute, the operational status screen appears on the terminal screen.
2. Press the <Enter> key several times to display the password prompt.
Operating MBE
To operate MBE:
1.Configure MBE according to the application (see the LAN RANger Series Configuration Guide).
2.During normal operation (when the remote workstations are active): The READY indicator lights up continuously
The Tx and Rx indicators blink occasionally The LAN and LINK error indicators remain OFF.
Power-off
To power-off MBE:
•Set the POWER switch on the rear panel to the OFF position.
Operating Instructions |
Order from: Cutter Networks | www.bestdatasource.com |
