Raymarine ST60 manual Mounting options, Parts supplied

Preface ix

Mounting options

If you do not want to surface mount your ST60 instrument, options are available for:

•Flush mounting. If you have ordered the flush mounting option a low-profile bezel and four fixing screws are also provided.

•Bracket mounting.

Parts supplied

Unpack your ST60 instrument and check that the following items are present:

Either

•Item 1a, ST60 Wind instrument, fitted with standard bezel for surface mount- ing

•or

•Item 1b, ST60 Close Hauled Wind instrument, fitted with standard bezel for surface mounting.

•Item 2, Fixing studs (2).

•Item 3, Thumb nuts (2).

•Item 4, Gasket.

•Either

•Item 5a, Wind Vane (not with ST60 Close Hauled Wind)

•or

•Item 5b, Rotavecta (not with ST60 Close Hauled Wind).

•Item 6, SeaTalk interconnection cable.

•Item 7, Power cable (not with ST60 Close Hauled Wind).

•Item 8, Instrument Cover.

•Item 9, Junction Box (not with ST60 Close Hauled Wind).

•Item 10, Owner’s Handbook. A Warranty document and fitting templates are included in this Handbook.

•Item 11, Cue Card.

•Spare spade terminals are also provided, to re-terminate transducer cables if they have to be cut to facilitate installation.

Note: The above packing list is for an ST60 Wind system. Where an instrument is pur- chased separately, a transducer and junction box are not included.