Chapter 3: Installation | 15 |
Each ST60 instrument is supplied with a standard bezel for surface mounting. Optional mounting kits are available for flush mounting and bracket mounting the instrument. If you have ordered the flush mounting option a
Fitting the instruments
The ST60 Wind and ST60 Close Hauled Wind instruments can be installed using one of a number of different mounting options:
•Surface mounting. Gives a profile of approximately 0.95 in (24 mm).
•Flush mounting. Gives a profile of approximately 0.25 in (6 mm).
•Bracket mounting.
The ST60 instruments can also be mounted behind a panel with just the instrument dial and keys visible.
Surface mounting
To surface mount your ST60 instrument (see the Surface mounting illustration):
1.Ensure that:
•The selected location is clean, smooth and flat.
•There is sufficient space behind the location to accommodate the rear of the instrument and connectors.
4 | 1 | 2 | 1 | 3 | 5 | 2 | 5 |
Surface mounting
