RCA CC616 manual Charging the Battery, To Charge the Battery, Use the Refresh Button

Powering Your Camcorder

Charging the Battery

CHG

Indicator

POWER

Indicator

END

Indicator

REFRESH

Button

POWER

CHG END

REFRESH

Hold Battery		Caution
Flush and	Reference Marks	When a battery
Slide		is attached to
	To AC Wall	the adapter/
		charger, do not
	Outlet 100-240
		turn them
	Volts, 50/60 Hz.
		upside down.
		The battery may
		fall off and be
		damaged or
		cause injury.

REFRESH	Adapter/Charger
Indicator

To Charge the Battery

If the power connector is attached to the DC OUT jack on the adapter/charger, remove its plug.

1.Align reference mark on battery with mark on adapter/charger.

2.Hold the battery flush against the adapter/charger and slide it in the direction of the arrow.

3.Plug adapter/charger into nearest AC outlet (100-240V, 50/60Hz).

4.If the battery is properly connected, the adapter/charger’s CHG (charge) indicator will light.

Note: If you try to charge a battery that has not been charged for a long period of time, it may take a few minutes for the CHG indicator to light.

5.After the battery is charged, the END indicator will light.

6.Remove the charged battery by sliding it off the adapter/charger.

7.Attach the charged battery to the camcorder.

Use the REFRESH Button

The battery will provide increased operation time if you “refresh” it after five chargings. The refresh feature “refreshes” the battery by completely discharging it.

1.Attach battery to adapter/charger.

2.Press REFRESH. The REFRESH indicator will light and the battery will begin discharging.

3.When discharging is completed, the REFRESH indicator will turn off, and the CHG indicator will light. The battery will then charge.

4.After the battery is charged, the END indicator will light. Remove the battery from the adapter/charger.

12