Powering Your Camcorder

Optional Car Cord Adapter

The optional DCC08 car cord shown on page 64 allows you to power your camcorder from the cigarette lighter socket of a car, truck, or RV. It converts 12-volts to a 6-volt output.

Note: Consult the installation and operating instructions enclosed with the DCC08 for complete operating instructions.

Cautions: The DCC08 is designed to be used only with vehicles having negative ground electrical systems.

Use only car cord adapter DCC08 with this camcorder. Use of any other car cord adapter may damage the camcorder and void your warranty.

Using the DCC08 Car Cord Adapter

Cigarette

Lighter Socket POWER Indicator

Power

Connector

VCR

POWER

OFF

CAMERA

AUDIO

RF

VIDEO

Optional DCC08 Car Cord Adapter

L

E N S

C

O

V

E

R

1.Place the POWER switch in OFF to turn off the camcorder. Power indicator turns off.

2.If the battery is attached to the camcorder, remove it.

3.Hold the power connector flush against the back of the camcorder and press the bottom of the power connector down until it locks into place as shown.

4.Take the vehicle’s cigarette lighter out of the socket.

5.Insert the car cord’s cigarette lighter plug into the vehicle’s cigarette lighter socket. The POWER indicator on the car cord adapter will light.

6.Place the POWER switch in CAMERA to turn on the camcorder. The power indicator lights.

Caution: Make sure the camcorder’s power is turned off before removing the car cord’s plug from the cigarette lighter socket.

15

Page 17
Image 17
RCA CC616 manual Optional Car Cord Adapter, Using the DCC08 Car Cord Adapter