Regency L676 Installation, CONVERSION KIT #521-969FROM NG TO LP, LP Conversion Kit Contains

INSTALLATION

INSTALLATION

CONVERSION KIT #521-969 FROM NG TO LP

LP Conversion instructions for BEFORE UNIT INSTALLATION.

THIS CONVERSION MUST BE DONE BY A QUALIFIED GAS FITTER, IF IN DOUBT DO NOT DO THIS CONVERSION!!

LP Conversion Kit Contains:

Qty.	Part #	Description
1	910-462	LP Conversion Coil
1	904-573	Cable Tie
1	910-037	LP Pilot Orifice
1	904-345	Orifice #53 (back)
1	904-241	Orifice #56 (front)
1	904-529	Allen Key
1	918-590	LP Conversion Decal
1	908-528	Red Propane Label

1918-596 Instruction Sheet

1)Remove the glass door.

a.Release the 2 door latches on the left and right side at the top of the firebox.

b. Swing the door out from the top and release the hinges on the left and right side of the door by lifting them up.

Hinge

Door

	Front Burner Removed
c. Place the door on a soft surface to prevent	4) Remove the back burner by removing the
	screw.
scratching.
2) Remove the grate by undoing the 2 screws
on the right and left side.

Latch Location

Latch

Grate

3) Remove the front burner by removing the screw.

Back Burner

5)Remove the rear log stand by removing the 4 screws.

Rear Log Stand

Front Burner

28 Regency® L676 Direct Vent Gas Fireplace