INSTALLATION
CONVERSION KIT FROM NG TO LPG PART #372-969
for P48-2 SIT 820 NOVA Gas Valve
THIS CONVERSION MUST BE DONE BY A QUALIFIED GAS FITTER
IF IN DOUBT DO NOT DO THIS CONVERSION !!
Each Kit contains one LPG Conversion Kit and one DC Sparker Kit.
LPG Conversion Kit Contains:
Qty. Part # | Description |
1
1
1 | 5/32" Allen Key |
1
1
DC Sparker Kit Contains:
Qty. Part # | Description |
1
1
1
1 | Nut |
2
0.500 in.
1
Head
2
1 | Spark Generator | |
|
| Battery Holder |
1 | Spark Generator | |
|
| Switch C/W Wire |
1
1
1
1
Conversion Kit:
1)Remove the louvers and trim kit. Re- move the front door.
2)Remove the logs, embers.
3)Remove the grate by lifting straight up.
4) Remove the burner assembly by remov- | 7) Remove burner orifi ce with a 1/2" |
ing the 1 Phillips head screw and then | wrench and discard. Use another |
slide the burner assembly away from the | wrench to hold on to the elbow behind |
orifi ce and lift out. | the orifi ce. |
| Burner Orifi ce |
Diagram 1: |
|
Remove the left screw and then slide the | 8) Reinstall new burner orifi ce LP stamped |
burner assembly away from the orifi ce and | |
lift out. | #47 and tighten. |
| 9) Turn control knob to the “OFF” position. |
| 10) Remove the black protection cap by |
| hand from the |
5)Pull off the pilot cap to expose the pilot orifi ce.
Fig.1
6)Unscrew the pilot orifi ce with the allen key and replace with the LP pilot orifi ce in the kit and replace pilot cap.
Regency® | 27 |