INSTALLATION
28)Locate the ground lug at the receptical box, left of the unit.
29)Connect one end of the supplied green ground wire to the lug with the nut and washer from the kit.
Ground
wire from
kit
30)Install the 1/2" bushing to the heat shield.
31)Run the other end of the ground wire and DC spark generator wires through the bushing on the heat shield.
Heat Shield
32)Plug the DC spark generator wires to the DC Sparker.
33)Connect the ground wire to the DC Sparker mounting bracket.
34)Install the supplied battery into the DC Sparker Box by opening the battery compartment.
NOTE: The battery in the DC Sparker Box will need to be replaced annually.
Battery
Compartment
35)Mount the heat shield to the DC Sparker. Secure into place with the velcro, which is provided in the kit.
36)Find a location which is not too hot and is easy to reach for changing the battery. Note: It should be kept away from the chain.
Chain
37)Tie up the loose wire with the wire clip.
Regency® | 29 |