INSTALLATION
9)Connect the female connecter on the white wire to the TH terminal of the valve.
10)Remove the thermodisc cover from the thermodisc plate by undoing the 2 screws and then remove the wire grommet.
Thermodisc Plate
Thermodisc Cover
Grommet
12)Place the wire grommet back into the thermodisc cover with the 2 female ends of the wires inside the cover as shown.
13)Connect the female ends of the red and white wires to the thermo- disc.
14) Reattach the thermodisc plate to the thermodisc cover using the 2 screws removed in step 10.
11)Take the white wire from the kit and the red wire from the burner ON/OFF switch and place the grommet thru the wires.
Regency® | 25 |
